| Raw Yarn: | Aramid Needle Felt |
|---|---|
| Technics: | Non-Woven |
| Usage: | Suit, Overcoat, Jacket, Trousers |
| Pattern: | Thermal Bonded, Needle Punched |
| Manual Process: | Others |
| Width: | 2.2meters |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Aramid needle felt heat resistance aramid fabric rolls
Product Description
The limiting oxygen index (LOI) of meta-aramid is more than 28, so it will not continue to burn when it leaves the flame.The flame-retardant properties of meta-aramid fiber are determined by its own chemical structure, so it is a flame-retardant fiber and will not decrease or lose flame-retardant properties due to use time and washing times.It has good thermal stability, can be used continuously at 205ºC, and can still maintain high strength under high temperature conditions greater than 205ºC.With a high decomposition temperature, and will not melt or melt under high temperature conditions, and only begin to carbonize when the temperature is greater than 370°C
Feature:
It has the advantages of heat resistance, high strength, high wear resistance, good flexibility, low shrinkage, stable chemical structure, no droplets in combustion, and no poisonous gas.
Production Process
As the leading company in China, we manufacture nonwovens using the thermobonding process, products can be chosen between needled and thermobonded wadding. In the needled version, the fibre fleece is mechanically bonded, this process is therefore 100% natural. We also were in the position to produce thermally bonded sheep wool.
Fiber Composition
Insulation:nomex/aramid
Depend on request
Properties
|
Product Item |
Basis Weight |
Thickness |
Roll Length |
||
|
g/m² |
oz/yd² |
mm |
inch |
m |
|
|
AB_SP_FRI-300 |
300 |
8.85 |
1.8 |
0.07 |
70 |
|
AB_SP_FRI-500 |
500 |
14.75 |
2.5 |
0.10 |
50 |
|
AB_SP_FRI-1000 |
1000 |
29.50 |
5.5 |
0.21 |
20 |
|
Note: The weight, width, length can be customized |
|||||
Available Widths
1) Max 110" (280cm) roll width (nominal);
2) With a 2" (5.1 cm) inside diameter core.
3) The weight, width, length can be customized
Guidelines
• Allow 24 hours for recovery of the Insulation after removal from vacuum pack
• Avoid storage in a compressed state
• Store away from heat
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}